+92-51-2614131
Alumni of a RED-C IET are ambassadors at large and play an active role in developing goodwill for the Institute. They also play a very important role in helping the Institute for establishing new programmes through their continuous support both materially and with ideas. During the last few years the Institute has made remarkable progress in every field. RED-C IET has been able to start not only new programms but new academic departments have also been added. KPK Board of Technical Education, Peshawar and Federal Board of Intermediate and Secondary Education, Islamabad desires every Institute to establish Alumni Office at the campus. The major objective of the Alumni Office is to establish and maintain active collaboration with the Alumni of the institute.
RED-C IET Alumni Association is working under the control of the Chief Executive Committee (CEC) of RED-C Institute of Engineering & Technology Islamabad. The Association has chapters in South Africa, Japan, Middle East and Europe. The Chief Executive Committee is facilitating the association in pursuing their activities and contributions to support the institute with new vigor.
The Mission Statement of the Association shall be “To contribute to the development of RED-C IET and its alumni through improvement and development of curricula and programs, provision of financial and material support and enhancing networking and career development among the alumni”.
1. To contribute towards the improvement of the current as well as the development of new curriculum and programs at RED-C IET;
2. To raise financial and material resources for efficient and effective teaching and learning as well as the general wellbeing of students and staff at RED-C IET; and.
3. To develop and help maintain active alumni interactions and enhance the image of RED-C IET through self-enrichment, career development and role modeling in the wider society.
"REDC IET's civil technology program requirements matched real-life problems and solutions. The program better prepared me in advancing my engineering career ... When I started at REDC institute of engineering and technology, Islamabad I was a cadd/drafting technician and have since worked my way to CEO of a multi-million Rupees civil engineering and surveying firm. REDC IET did something right."
Institute Roll #: CL-10-2 Name: Muhammad Ahsan Ullah
Job Activities: Working at Design Men as CEO.
"My engineering classes have definitely helped me in my current job as a business owner. Throughout my studies, I've developed a level of engineering design capability that now allows me to learn any design software 10 times faster than I would have been able to previously do."
Institute Roll #: ML-17-24 Name: Tanveer Ahmed
Job Activities: Working at NESCOM as Sub-Engineer.
"The civil engineering technology program at REDC institute of engineering and technology, Islamabad was a perfect fit for my work schedule. A lot of my coworkers had diploma holder from REDC IET and had great things to say about the program. I also liked that there were a lot of hands-on learning opportunities in the program, which have been very useful when practicing civil engineering in the real world."
Institute Roll #: CL-10-7 Name: Mahmood Ul Hassan
Job Activities: Own Construction Company
"I chose REDC institute of engineering and technology, Islamabad because it was close to home and offered small classes, which meant plenty of one-on-one time with professors if needed. REDC IET turned out to be a great choice, and I couldn't be happier."
Institute Roll #: EL-10-2 Name: Muhammad Safeer
Job Activities: Working at KRL as Technician.
"The engineering technology faculty members at REDC institute of engineering and technology, Islamabad are very knowledgeable and helpful. All of the professors teach the material very clearly and do a great job of preparing students with the knowledge needed to succeed after institute. The professors have great experience in the engineering field so be ready to take advantage of that and tap into their experience and knowledge."
Institute Roll #: EL-10-1 Name: Shahid Mehmood
Job Activities: Working at Abu-Zahbi.
"REDC institute of engineering and technology, Islamabad has a very good Professional Career-Readiness Center, as well as a network of experienced professors who have been in the engineering world for decades."
Institute Roll #: EL-10-6 Name: Hafiz Masood Hussain
Job Activities: Working at Civil Aviation Authority as Technical Expert.
"I knew that REDC institute of engineering and technology, Islamabad had a reputable engineering program that caters to non-traditional students like myself. The wide variety of courses available in the evenings, along with the convenient location made the decision pretty easy."
Institute Roll #: ML-16-7 Name: Hamza Gul
Job Activities: Own Mechanical Work shop.
"I chose this major and REDC institute of engineering and technology, Islamabad because the professors are brilliant, the class sizes are small and the location isn't far from home. Being that I have to commute, it is perfect. The small class sizes allow for more one-on-one time with professors rather than a lecture hall scenario where I would be just another number in the crowd."
Institute Roll #: ML-17-21 Name: Yasir Mahmood Shah
Job Activities: Working at NESCOM as Sub-Engineer.
"I chose REDC institute of engineering and technology, Islamabad for four good reasons: I can complete the DAE in petroleum technology diploma in as little as three years, the cost of tuition is reasonable, the class sizes are small, and last but not least, REDC IET is in the Islamabad, which is well known for technological education."
Institute Roll #: PM-10-23 Name: Sohail Ahmed Fraz
Job Activities: Working at Qatar as Drilling Engineer.
"The course work at REDC institute of engineering and technology, Islamabad offered practical, real world engineering in a field that interested me, civil engineering. They better prepared me for advancement as a consulting engineer where overall project management, oversight of staff and budget tracking are most important."
Institute Roll #: CL-10-25 Name: Khurshid Ahmed
Job Activities: Own Electrical Work shop.
"I plan to use my technical education to the fullest. My goal is to combine what I've learned in the classroom with my people skills to be in a manager position within the next five years. Most definitely, my DAE diploma in civil technology was the catalyst that I needed to embark in the engineering field."
Institute Roll #: CL-10-4 Name: Waseem Afzal
Job Activities: Working at Atomic Energy Commission as Technician.
"My company was very supportive of my desire to excel in my career, and they assisted me greatly when I enrolled at REDC institute of engineering and technology, Islamabad and throughout my journey there. Based on the training and education I received at REDC IET, I have grown from the position of draftsman to that of civil engineering project manager."
Institute Roll #: CL-10-10 Name: Waseem Jamil
Job Activities: Working at Construction company in Saudi Araibia.
"As for the mechanical technology major, this program teaches students how mechanisms work. This will help me in the future with directly creating new advancements in machine design. With knowledge in this field, I want to develop vehicle spare parts for automobile market."
Institute Roll #: ML-17-5 Name: Qaisar Iqbal
Job Activities: Working at KRL as Sub-Engineer.
"Writing lab reports for nearly every engineering technology class, I took at REDC IET helped prepare me for all the paperwork required for specially Grid station. In addition, the ability to analyze circuit drawings was a skill I learned over again and again in the technology classes at REDC IET."
Institute Roll #: EL-10-28 Name: Muhammad Zeeshan Kiani
Job Activities: Own setup for Electrical generators and supplier in Pakistan.
"I selected REDC institute of engineering and technology first and foremost because it had the major I wanted, which was civil engineering technology. I also liked REDC IET because it was a great institute where I could receive individual attention from all of my professors if necessary ... Lastly, I was very impressed by REDC IET's high rate of job placement after Diploma of Associate Engineering Diploma, for which I am very thankful for now."
Institute Roll #: CL-10-1 Name: Shahid Hussain
Job Activities: Working at FBISE Technical Department as Sub-Engineer.
"Four months after completion of DAE in electrical technology, I was promoted to the position of verification and validation engineer. I would not have gotten that position without this achievement from REDC institute of engineering and technology."
Institute Roll #: EL-10-12 Name: Shahzad Ahmed
Job Activities: Working at KRL as Sub-Engineer.
"I chose REDC institute of engineering and technology, Islamabad for its accredited electrical technology program and convenient class schedule. It was important for me to be able to get into a classroom and do some hands-on learning."
Institute Roll #: EL-10-20 Name: Abdur Rehman
Job Activities: Working at WAPDA as Sub-Engineer.
"I chose REDC institute of engineering and technology, Islamabad because they offered me scholarships. Also, they had a transfer agreement that ensured that all the course work I took at this institute would apply to my degree. I really loved REDC institute of engineering and technology, Islamabad. The hands-on training I got was very impressive."
Institute Roll #: EL-10-23 Name: Naveed Anwar
Job Activities: Working at WAPDA as Sub-Engineer.
